Max. PCB width: 560 mm
Heating Zones: 26 zones
Through Put: 352PCB/hour
Weight: 2800KG
Dimension: 7100x1410x1500mm
Power: 400 V / 3 / N / PE - 50 Hz / 60 Hz
Ersa SMT Reflow Oven HOTFLOW 4/26
Ersa SMT Reflow Oven HOTFLOW 4/26
Excellent heat transfer with the most varied board assemblies
Rest-oxygen monitoring with low N2 consumption
Low energy consumption through intelligent energy management
Multi-level controlled cooling
Multi-level process gas cleaning system
"On the fly" maintenance for increased machine availability / uptime
Multi-track conveyor system (1-4)
Ersa Process Control (EPC) for continuous process monitoring
Ersa Auto Profiler software for quickly generating temperature profiles
Ersa HOTFLOW 4/26 Reflow Oven
The Ersa HOTFLOW 4/26 reflow system is of robust design and manufactured entirely from steel, welded air-tight, powder coated and with interior electric cabinet and a PC operating terminal. Features include the motorized hood opening, quick-change convection heater cassettes, multi-level process gas cleaning and a powerful and effective cooling zone.
Through Put | 352PCB/hour |
Heating Zones | 26 zones |
Solder Peak zones | 3 zones |
Cooling zones | 4 zones |
Power | 400 V / 3 / N / PE - 50 Hz / 60 Hz |
Compressed air | Yes |
Min. PCB length | 50 mm |
Min. PCB width | 50 mm |
Max. PCB length | Not applicable mm |
Max. PCB width | 560 mm |
Weight | 2800KG |
Dimension | 7100x1410x1500mm |
Conveyor system
Working width: 45-580 mm automatically infinitely adjustable
Clear passing height: +25 (35)/-37 mm
Centre support, automatically infinitely adjustable
Conveyor speed: 20-200 cm/min
Pin-and-chain conveyor with 3, 4 or 5 mm pins
Process zone
Process length: 4,790 mm
Heated length: 3,650 mm
Cooling length: 1,840 mm
Heating system
Up to 26 convections heating cassettes
(Preheat zone up to 26 cassettes, reflow zone up to 6 cassettes)
Volumetric flow rate each module, adjustable up to 500 m3/h
Rated power each module: 3.3 kW
Cooling
Up to 4 level cooling zone with water back cooling
Electrical data
400 V, 3 Phase, N, Ground, 50/60 Hz
Continuous output during operation: appr. 9-15 kW
Exhaust
Extraction capacity 2 stacks each 400 m3/h, monitored
Options:
Multi-track conveyor system with separate drives each track
Connectable center supports
Inert atmosphere feature, available with rest-oxygen monitoring and control
Metering of N2 consumption
Power-cooling with 3 convection modules and "on the fly" process gas cleaning
Emergency power supply
Ersa Process Control (EPC)
Auto Profiler
Energy consumption computation
Quick profile change
Keywords:
Hanwha SM481 PLUS Pick and Place Machine, Hanwha SM482 PLUS Pick and Place Machine, Hanwha SM471 PLUS Pick and Place Machine, Hanwha Decan S2 Pick and Place Machine, JUKI RS-1R Pick and Place Machine, DEK NeoHorizon 03ix SMT Stencil Printer, JUKI RS-1R SMT Assembly Line, Hanwha SM481 Plus SMT Assembly Line.
Contact:Tommy
Phone:+8613691605420
E-mail:tommy@qersa.com
Address:94# Guangtian Road Yanluo Baoan District Shenzhen