Heller 1707 MK7 SMT Reflow Oven

Heller 1707 MK7 SMT Reflow Oven

Heller 1707 MK7 SMT Reflow Oven

Products Description :
Best value SMT Reflow Oven in the market. Designed for Low Cost of Ownership.
The 1700 models support high mix / medium volume throughput... at speeds up to 24 inches (60 centimeters) per minute, while conserving valuable factory floor space. Rapid response times and precise temperature controls assure process uniformity, regardless of component density or board loading, with identical profile performance in either air or nitrogen.
Highest Yields and Tight Process Control
The most efficient heat transfer from extra high volume, high-velocity, heating modules, producing heater module response of less than one second to temperature changes of less than 0.1ºC, thereby maintaining profile integrity for heavy board loads.
Wide process window for "universal profiling" - allows many different boards to be run on a single temperature profile
Advanced 5 thermocouple PCB profiling and process parameter logging capability with the capacity to store up to 500 temperature recipes and 500 profile graphs

Model	1707MK7 (Air)	1707MK7 (Nitrogen)
Electric Supply
Power Input (3 Phase) Standard	480 volts	480 volts
Breaker Size	100 amps @ 480v	100 amps @ 480v
kW	7 - 12 Continuous	7 - 12 Continuous
Typical Run Current	20 - 30 amps @ 480v	20 - 30 amps @ 480v
Optional Power Inputs Available	208/240/380/400/415/440/480 VAC	208/240/380/400/415/440/480 VAC
Frequency	50/60 Hz	50/60 Hz
Sequential Zone Turn On	S	S
Dimensions
Overall Oven Dimensions	360x152x144cm	360x152x144cm
Typical Net Weight	3197 lbs. (1450kg)	3197 lbs. (1450kg)
Typical Shipping Weight	3814 lbs. (1730 kg)	3814 lbs. (1730 kg)
Typical Shipping Dimension	370 x 185 x 185 cm	370 x 185 x 185 cm
Computer Control
AMD or Intel Based Computer	S	S
Flat Screen Monitor w/Mount	S	S
Windows Operating System	Windows 10 Home	Windows 10 Home
Auto Start Software	S	S
Data Logging	S	S
Password Protection	S	S
LAN Networking	O	O
Inert Atmosphere
Minimum PPM Oxygen	-	10-25 PPM*
Waterless Cooling w/ Flux
Typical Nitrogen Consumption	-	500 - 700 SCFH **
Additional Features
KIC Profiling Software	S	S
Signal Light Tower	S	S
Powered Hood Lift	S	S
Five (5)Thermocouple Profiling	S	S
Mesh Belt Conveyor
Height From Floor	36.6" + 2.4"  (93 cm + 6 cm)	36.6" + 2.4"  (93 cm + 6 cm)
Maximum PCB Width	22" (56 cm)	22" (56 cm)
Space Required Between PCB's	0.0" (0.0 cm)	0.0" (0.0 cm)
Conveyor Length On-Load	18" (46 cm) *	18" (46 cm) *
Conveyor Length Off-Load	18" (46 cm) *	18" (46 cm) *
Heated Tunnel Length	75"  (190 cm)	75"  (190 cm)
Process Clearance Above Mesh Belt	2.3" (5.8 cm)	2.3" (5.8 cm)
Mesh Belt Pitch	0.5" (1.27 cm)	0.5" (1.27 cm)
Maximum Conveyor Speed	74"/Min (188 cm/min.)	74"/Min (188 cm/min.)
Conveyor Direction Left to Right	S	S
Conveyor Speed Control	Closed Loop	Closed Loop
Edge Hold Conveyor System Option
Height from Floor – Standard	37.8" + 2.4"  (96 cm + 6 cm)	37.8" + 2.4"  (96 cm + 6 cm)
Height from Floor – Optional	35.4" + 2.4" (90 cm + 6 cm)	35.4" + 2.4" (90 cm + 6 cm)
Clearance Above & Below Conveyor Pins	1.15" (2.9 cm)	1.15" (2.9 cm)
Length of PCB Support Pins	.187" (4.75 mm)	.187" (4.75 mm)
3 mm long support pins	O	O
Minimum/Maximum Board Width	2" – 22" (5 – 56 cm) 24” (61cm) Optional**	2" – 22" (5 – 56 cm) 24” (61cm) Optional**
Power Width Adjustment	S	S
Forced Convection Zones
Top & Bottom	7	7
Heater Type	Instant response open coil	Instant response open coil
Heater Material	Nichrome	Nichrome
Profile Change Time	5 – 15 minutes	5 - 15 minutes
Temperature Control
Accuracy of Temperature Controller	± .1°C	± .1°C
Cross-Belt Temperature Tolerance	±3.0°C	±3.0°C
Heater Wattage Per Zone	5400 w***	5400 w***
Temperature Range Standard	60-350°C	60-350°C
High Temperature Up to 450°C	O	O

Keywords:

Hanwha SM481 PLUS Pick and Place Machine, Hanwha SM482 PLUS Pick and Place Machine, Hanwha SM471 PLUS Pick and Place Machine, Hanwha Decan S2 Pick and Place Machine, JUKI RS-1R Pick and Place Machine, DEK NeoHorizon 03ix SMT Stencil Printer, JUKI RS-1R SMT Assembly Line, Hanwha SM481 Plus SMT Assembly Line.

We provide Panasonic SMT assembly line solutions, including Hanwha Assembly Line Equipments ,  SMT Assembly Line Equipment,  HanWha Pick and Place Machine Machine,  JUKI Pick and Place machine,  DEK SMT Stencil Printer,  Heller SMT Reflow Oven,  ERSA SMT Reflow Oven,  Kou Young 3D AOI SPI,  SMT Assembly Line,  any kind SMT equipments you may need, please contact us for more information: Tommy wechat whatsapp: +8613691605420, Email: tommy@qersa.com
1) This is the first time I use this kind of machine, is it easy to operate?
There is English manual or guide video that show you how to use machine.
If you still have any question, please contact us by e-mail/ skype/ phone/ wechat and other online service.
2) If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG, we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
3) MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you? ( Very easy and flexible !)
A. Consult us about this product on line or by e-mail.
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment And 100% quality check before shipping.
F.Send your order by air or by sea.
5)Why choose us ?
A. We have customer world wide, you can check our credit service with them !
B. Free Online installation, traning, programming and technical support !
C. One stop full SMT Assembly Line Equipments Solutions !